Cross Technologies 2416-x02 Manual de Instruções descarregar pdf (Página 7)

Table 1.1 lists the status requests for the 2416-x02 and briefly describes them.

PLEASE NOTE:

Status requests of values specific to a channel

must be preceded by a *i where *i is the channel number.

* P

PLEASE NOTE:

The two character {aa}(00-31) prefix, in the table below,

should be used ONLY when RS-485 is selected.

TABLE 1.1 2415-x02 Statuus

Status Requests

TABLE 1.1 2415-x02 Status Requests

Command Syntax* Description

Get channel frequency {aa*iSF} Returns {*iSFxxxxxxx} where :

• i = 1, 2, 3 or 4 designating the channel number

• xxxxxxx = frequency in KHz

Get channel gain {aa*iSG} Returns {*iSGxxx} where:

• i = 1, 2, 3 or 4 designating the channel number

• xxx = gain to nearest 1.0 dB (e.g., +14 = 14 dB)

Get mute setting {aa*iSM} Returns {*iSMx} where :

• i = 1, 2, 3, or 4 designating the channel number

• x = 1 for Mute ON (carrier OFF)

• x = 0 for Mute OFF (carrier ON)

Get reference status {aaSE} Returns {SExy} where :

• x = setting: 0 for internal 10 MHz;

1 for external 10 MHz; 2 for auto detect

• y = currently selected in hardware :

0 for internal 10 MHz; 1 for external 10 MHz

Get setting for reference {aa*iSL} Returns {*iSLx} where :

insertion on output • i = 1, 2, 3 or 4 designating the channel number

• x = 0 for non-insertion; 1 for insertion

Get reference offset (Option O) {aaSO} Returns {SOxxxxx} where :

• xxxxx = an offset amount between -2000 & +2000

(Status Requests continued on page 8...)

2415-x02 Manual, Rev. A Page 7 02/25/15

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Sem comentários

Cross Technologies 2416-x02 Manual de Instruções Página 7